Panel Moulding 1-7/8" - 5

This beveled panel moulding 1-7/8" - 5 measures 1.875" wide by .812" thickness. The shaker style profile is comprised of a 1/4" wide horizontal line at the top, connected to a 34.528-degree angled line that transitions into a 5/8" wide horizontal line leaving a 1/8" thickness dimension on the thin side of the design, the back side rabbet measures 1/4" wide by 9/16" tall. We have another similar designs in the same width for your review and consideration, panel moulding 1.875" - 1 and panel moulding 1.875" - 4.

Architects, interior designers, lumber mills, and manufacturers have been utilizing our vast variety of creative designs for years, we trust you will find that special profile to enhance the architectural style of your client's home. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.

For knife quoting purposes use the calculator below, we have added only the important measurements, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 1.875" / Depth of Cut = .688" (top knives).

Thickness = .812" / Depth of Cut = .250" (left cutters).