Panel Moulding 1-3/4" - 39

This attractive panel moulding 1-3/4" - 39 measures 1.750" wide by one inch thickness, allowing the detail to be milled out of five quarter lumber. The beautiful profile is composed of a two tangent radius cyma recta above the 5/16" wide by 5/8" tall rabbet on the left, connected to a shallow two tangent radius ogee in the center, attached to a 1/16" vertical step with a 17/64" quarter round circle on the right side of the design.

Our precise cad drawings contain plenty of important information that will assist you during setup and milling of this detail. Our acrylic templates provide sufficient blend areas on the knives so you will never realize where one cutter begins or ends, these specific design features will substantially increase yield during the milling process.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.750" / Depth of Cut = .967" (top knives.)

Thickness = 1.000" / Depth of Cut = .312" (left cutters.)