Panel Moulding 1-3/4" - 34

This elegant panel molding 1-3/4" - 34 measures 1.750" width by .938" thickness, requiring the use of five quarter lumber for machining on an industrial-grade molder. The stylish profile contains a 3/8" flat horizontal line segment connected to a 1/8" cove with a 3/32" vertical step on the top left. The short line attaches to a 5/32" sunk fillet transitioning into a downsloping two tangent radius s-shaped curvature in the center, with a 3/32" deep by 1/8" wide perpendicular notch on the designs right side.

Custom-made elegance is a phrase used to define the beauty, style, and artisanship of thousands of our molding designs. If you own a recently built house or older dated residence, we have the professional ability, knowledge, and experience to create and produce visually stunning details that will complement the architectural setting of your elegant home and office.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.750" / Depth of Cut = .890" (top blades).

Thickness = .938" / Depth of Cut = .250" (left cutters).