Panel Moulding 1-11/16" - 2

This attractive panel moulding 1-11/16" - 2 measures 1.687" width by .750" thickness, requiring the use of 1-15/16" wide blank of four-quarter lumber for milling on a commercial moulder. The stylish profile composes a 3/8" radius convex arc above the 1/4" wide by 3/8" tall rabbet for the panel on the top left. The bead connects to a downsloping two tangent radius s-shaped curvature in the center, attached to a thumbnail-shaped arc on the design's right side.

Review our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind molder knives for all the major brand names of machinery, including Weinig, Leadermac, Homag, Scmi, Diehl, Wadkin, Williams & Hussey, and more? Try our exceptional services; you will be delighted with the results; all the beautiful moldings you manufacture will surely be a cut above the rest.

Caution: the cutters will come within .020" of the machine bed plates when milling this detail. We recommend a wooden, phenolic, or plastic sacrificial bed plate for these types of milling operations. For knife quoting purposes, click the calculator below; we have added only the important measurements and enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the machinery to help operators save time and increase accuracy during machine setup.

Width = 1.687" / Depth of Cut = .750" (top knives).

Thickness = .750" / Depth of Cut = .250" (left cutters).