Panel Moulding 1-5/8" - 14

This single bead panel moulding 1-5/8" - 14 measures 1.625" wide by .750" thickness, enabling the pattern to be machined from four quarter lumber. The elegant profile is composed of a 3/32" wide flat line, positioned above the 3/8" wide by 3/8" tall rabbet for the panel on the top left, connected to a graceful two tangent radius cyma reversa in the center, joined to a 1/16" wide by 7/64" deep sunk fillet that merges with a 21/64" wide thumbnail shaped semicircle with a 3/32" wide line segment on the right side of the design.

Did you ever wonder why some mouldings look and feel better than others in different homes, offices and other creative buildings? Please read our article on knife marks, learn how machine feed rates and rpm (revolutions per minute) of the cutter heads can directly affect the quality of your finished patterns. Following or exceeding industry standards will allow your company to lead the way in moulding artisanship.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.625" / Depth of Cut = .580" (top knives).

Thickness = .750" / Depth of Cut = .375" (left cutters).