Panel Moulding 1-5/8" - 12

This designer panel moulding 1-5/8" - 12 measures 1.625" wide by .750" thickness, authorizing the detail to be machined out of four quarter lumber. The beautiful profile is composed of a 1/8" wide flat line, above the 1/4" wide by 3/8" tall rabbet for the panel on the top left, connected to a graceful two tangent radius cyma reversa with a 1/8" vertical step in the center, joined to a lovely thumbnail shaped bead with a 3/16" wide line segment and a 1/8" wide by 3/32" deep perpendicular notch on the right side of the design.

Custom-made elegance is a phrase used to define the beauty, style and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability knowledge and experience to create visually stunning molding profiles that will complement the architectural decor of your elegant home or office.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.625" / Depth of Cut = .583" (top knives).

Thickness = .750" / Depth of Cut = .250" (left cutters).