Panel Mould 1-9/16" - 3

This distinguished panel mould 1-9/16" -3 measures 1.563" width by 1.125" thickness, requiring the use of a 1-13/16" wide blank of five or six-quarter lumber for milling on an industrial moulder. The custom profile contains a 19/32" broad half-circle on the top left. It connects to a 5/32" horizontal fillet attached to a deep downsloping 7/16" cove in the center, with a 3/8' wide bead on the profiles right edge The backside rabbet dimension is ¼" wide by 3/4" tall.

Our professionally designed acrylic templates and knives include the required draft angles to maintain the ability to sharpen the blades properly without modifying the detail. It will also prolong the milling time between sharpening. Regardless if you own an industrial shaper or a Weinig, Wadkin, Leadermac, SCMI, Diehl, Northtech, or Homag molder, our precision cutters will mill flawlessly on them all.

For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 1.562" / Depth of Cut = 1.032" (top blades).

Thickness = 1.125" / Depth of Cut = .250" (left cutters).