Panel Moulding 1-1/2" - 51

This bolection molding 1-1/2" - 51, measures 1.500" wide by 1.375" thickness, necessitating the use of six, or eight quarter lumber for milling on an industrial molder. The stylish profile consists of a 1/8" wide flat line on the top left, connected to a deep graceful two tangent radii cyma reversa in the center. Attached to a 3/16" wide by 1/8" deep notch with a 13/64" cove, leaving a 3/16" thickness dimension on the right side of the design. The backside rabbet measures 5/16" wide by 1-1/8" tall; this area is adjustable to any specific needs.

Custom-made elegance is a phrase used to define the beauty, style and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability knowledge and experience to create visually stunning molding profiles that will complement the architectural decor of your elegant home or office.

For molding knife quoting purposes click to open the calculator below, we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.500" / Depth of Cut = 1.188" (top knives).

Thickness = 1.375" / Depth of Cut = .312" (left cutters).