Panel Moulding 1-1/2" - 35

This lovely panel moulding 1-1/2" - 35 measures 1.500" width by .812" thickness, requiring the use of a 1-3/4" wide blank of four-quarter lumber for milling on a commercial moulder. The beautiful profile composes a 9/64" wide horizontal line on the top left, positioned above the panel's 3/8" wide by 7/16" tall rabbet. The short line connects to a downsloping two tangent radius thumbnail shaped convex arc in the center with another 9/64" fillet and a 23/64" cove on the design's right side.

Review our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind molder knives for all the major brand names of machinery, including Weinig, Leadermac, Homag, Scmi, Diehl, Wadkin, Williams & Hussey, and more? Try our exceptional services; you will be delighted with the results; all the beautiful moldings you manufacture will surely be a cut above the rest.

For knife quoting purposes, click the calculator below; we have added only the important measurements and enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.500" / Depth of Cut = .638" (top knives).

Thickness = .812" / Depth of Cut = .375" (left cutters).