Panel Mould 1-3/8" - 29

This distinctive panel mould 1-3/8" - 29, measures 1.375" width by .812" tall, allowing the use of four-quarter lumber for milling on an industrial-grade molder. The custom profile contains a 3/16" cove tied to a 3/32" horizontal fillet on the top left. The line connects to a 1/2" broad half-circle with an additional 3/32" line segment with a 3/32" vertical step and decorative ogee on the right side of the design, the backside rabbet dimension is 1/4" across by 7/32" tall.

Our professionally designed acrylic templates and knives include the required draft angles and blend areas to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own an industrial shaper or molder such as a Weinig, Wadkin, Leadermac, SCM, Diehl, Northtech or Homag molder, our precision cutters will mill flawlessly on them all.

For molding knife quoting purposes click to open the calculator below, we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.375" / Depth of Cut = .700" (top knives).

Thickness = .812" / Depth of Cut = .250" (left cutters).