Panel Mould 1-3/8" - 22

This decorative panel mould 1-3/8" - 22 measures 1.375" wide by .750" thickness, allowing the detail to be machined out of four-quarter lumber. The beautiful profile is composed of a 7/64" wide horizontal line on the left side, attached to an elevation changing two tangent radius cyma reversa in the center, joined to a 5/16" wide half round bead with a 3/32" wide line segment on the right side of the design. The backside rabbet dimension is 1/4" wide by 1/2" tall, the height of the rabbet can be adjusted to any specific need with a simple axial adjustment of the left cutter head on the molder. We offer a larger version of this design with a 3/4" rabbet for your review and consideration, panel molding 1.937" - 2.

Read our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind moulder knives for all the major brand names of machinery including Weinig, Leadermac, Homag, Scmi, Diehl, Wadkin, Williams & Hussey and more. Try our exceptional services, you'll be delighted with the results, all the beautiful mouldings you manufacture will surely be a cut above the rest.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.375" / Depth of Cut = .641" (top knives.)

Thickness = .750" / Depth of Cut = .250" (left cutters.)