Panel Moulding 1-5/16" - 5

This creative panel moulding 1-5/16" - 5 measures 1.312" wide by .859" thickness, allowing the pattern to be machined out of four quarter lumber. The ornamental profile is composed of a 13/64" quarter round arc joined to a 29/64" wide half round circle on the top left, joined to a 3/32" wide fillet and a 1/4" cove in the center, connected to an 1/8" tall by 1/8" wide perpendicular notch with a 1/8" vertical step and a 5/32" quarter round bead on the right side of the design. We offer another profile with similar design characteristics for your review and consideration, panel mould 1-5/16" - 7.

Our professionally designed acrylic templates and knives include the required draft angles and blend areas to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own an industrial shaper or moulder such as a Weinig, Wadkin, Leadermac, SCM, Diehl, Northtech or Homag molder, our precision cutters will mill flawlessly on them all.

Caution; the moulding cutters will come within .020" of the machine bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these types of milling operations. For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.312" / Depth of Cut = .859" (top knives).

Thickness = .859" / Depth of Cut = .500" (left cutters).