Panel Mould 1-1/4" - 30

This decorative panel mould consists of an 11/32" convex thumbnail-shaped arc on the top left. It connects to a 29/64" cavetto flanked by a horizontal & vertical fillet in the center, with a 15/64" convex arc on the right side of the design. The back side rabbet measures 1/4" wide by 21/32" tall; this area is adjustable to any specific needs. The embellishing PM 1-1/4" - 30 detail measures 1.250" in width by .890" in thickness. The recommended rough wood rip size using four or five-quarter lumber is 1-1/2" wide.

Ever notice why some moldings look better than others in homes, offices, and older buildings? You may want to review our article on knife marks per inch. Read about how machine feed rates and rpm of cutter heads can directly determine the quality of the products you produce. Following or exceeding industry standards will allow your company to lead the way in molding artisanship.

The up-to-date combined high-speed steel knives & template prices are listed below for quoting purposes. On the left set of blades, we utilize a full 2.375"/60mm cutter head for the rabbet; this allows for multiple axial adjustments on a wide range of patterns.