Panel Moulding 1" - 10

This beautiful small panel moulding 1" - 10 measures 1.000" wide by .562" thickness, requiring the use of four quarter lumber for milling on an industrial moulder. The stylish profile is comprised of a 3/16" wide by 7/32" tall rabbet on the left, connected to a two tangent radius elliptical shaped arc that joins to a double tangent radius concave semicircle in the center, merged with a 7/64" vertical drop in elevation with a 7/32" quarter round bead on the right side of the design.

Looking for that special moulding to enhance the architectural style of your current project, send us a sketch, custom profile design is our specialty. Experience the elegant beauty we can create together from your outlined idea concepts and our vast knowledge of the woodworking industry.

Caution; the moulding cutters will come within .020" of the machine bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these types of milling operations. For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.000" / Depth of Cut = .562" (top knives).

Thickness = .562" / Depth of Cut = .187" (left cutters).