Ogee 2-3/8"

This huge ogee/cyma reversa 2-3/8" measures 2.375" thickness, the width gets milled to any required size within the parameters of the shaper used to cut the pattern. The unique profile consists of a 1/2" tall vertical line segment on the bottom right. That line connects to a 13/16" concave semicircle tangent off a 1/2" radius arc joined an angled line segment in the center. Joined to another 1/2" tall vertical line at the top of the design. This particular profile is too large to be manufactured on a molder.

Before beginning knife grinding procedures, read our article on knife cutting circles to see if you can safely mill this pattern on your machinery. This pattern can not get milled on most industrial molders.

For knife quoting purposes, click the calculator below; we have added only the important measurements; please enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = 2.375" / Depth of Cut = 1.625" (right blades).