Ogee 1-3/4"

This custom ogee/cyma recta edge1-3/4" measures 1.750" thickness, permitting the detail to be machined out of eight-quarter lumber; the width is milled to any desired size within the limits of the molder or shaper used to cut the pattern. The graceful profile contains a 15/32" tall vertical line on the bottom right side, attached to an 11/64" broad horizontal line segment, joined to a 49/64" radius arc tangent off of a 17/32" concave semicircle at the top of the design.

Before beginning knife grinding procedures, please read our article on knife cutting circles to see if you can safely mill this pattern on your machinery, this pattern can't get milled on certain moulder models.

For knife quoting purposes click the calculator below; we have added only the important measurements; please enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = 1.750" / Depth of Cut = 1.342" (right blades) or 1.342" (left cutters).