Corner 3/4" - 18

These outside corners are milled sprung (laying horizontally flat). They measure 1-1/16" wide by just over 5/8" during production. When installed, they measure 3/4" wide by 3/4" thickness with a 1/2" wide by 1/2" tall rabbet on the back side. Rough lumber size to mill these multiple corners would be about 2-7/16" wide and milled from four-quarter lumber.

Caution; the cutters will come within .020" of the machine bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these milling operations. For safety concerns, we strongly suggest an anti-kickback device be installed on the machine before attempting any milling procedures that involve splitting lumber into multiple pieces.

For knife quoting purposes use the calculator below; we have added only the important dimensions. A brief detailed explanation of how to use the calculator is located here.

Width = 2.201" / Depth of Cut = .549" (top knives) & .337" (bottom cutters).