Edge Moulding 3/4" - 48

This stepped edge moulding 3/4" - 48 measures .750" thickness, the detail can be milled from four quarter lumber, widths can be manufactured to any desired size within the parameters of the molder or shaper used to cut the pattern. The profile is composed of a 17/32" tall vertical line segment on the bottom, connected to two 1/8" wide by 1/8" deep stepped lines with a 3/32" vertical line at the top of the design.

Our high precision acrylic templates and knives include the required draft angles to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own a Weinig, Wadkin, Leadermac, SCM, Diehl, or Homag molder, our cutters will mill flawlessly on them all.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .750" / Depth of Cut = .250" (right blades) and/or .250" (left cutters.)