Edge Moulding 3/4" - 42

This beveled edge molding 3/4" - 42 measures .750" thickness by random widths, allowing any sized blank of four-quarter lumber for milling on an industrial molder. The chamfered profile contains a 5/16" tall line on the bottom right, connected to a 1/8" wide horizontal fillet merged with a 66.722 degree angled line in the center, with a 1/4" vertical line segment at a dimension of 9/16" width on the top.

You may want to review our article on knife marks per inch. Read about how machine feed rates and rpm of cutter heads can directly determine the quality of the products you produce. Following or exceeding industry standards will allow your company to lead the way in molding artisanship.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = .750" / Depth of Cut = .562" (right knives) or .562" (left cutters).