Edge Moulding 3/4" - 28

This decorative edge moulding 3/4" - 28 measures .750" thickness, enabling the pattern to be machined out of four quarter lumber, the width can be milled to any desired size within the parameters of the molder or shaper used to cut the detail. The beautiful profile is composed of a 1/8" vertical line on the bottom right, connected to a 3/16" concave semicircle tangent off of a 7/32" radius arc creating the ogee, attached to a 3/32" vertical line segment in the center with a 7/32" cove on the face side of the design. Manufacture two sets of knives for this detail (right and left cutter heads) and create a visually appealing chair rail moulding that will surely enhance the architectural decor of any room. We offer a similar profile in the same thickness with different inner dimensions to review and consider, edge molding .750" - 22.

Custom-made elegance is a phrase used to define the beauty, style and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability knowledge and experience to create profiles that will complement the architectural decor of your elegant home or office.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .750" / Depth of Cut = .562" (right blades) & .562" (left cutters.)