Edge Moulding 3/4" - 14

This concave edge moulding 3/4" - 14 measures .750" thickness, enabling the detail to be milled out of four quarter lumber, the width can be machined to any desired size within the parameters of the moulder or shaper used to cut the pattern. The embellishing profile could be used as a decorative crown moulding backer, it is comprised of a 1/4" tall vertical line on the bottom right, connected to a 1/8" wide by 1/8" tall perpendicular notch with a 1/4" cove in the center, joined with another 1/8" by 1/8" notch at the top edge of the design.

Our professionally designed acrylic templates and knives include the required draft angles to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own a Weinig, Wadkin, Leadermac, SCM, Diehl, Northtech or Homag molder, our precision cutters will mill flawlessly on them all.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .750" / Depth of Cut = .500" (right blades) or .500" (left cutters.)