Cabinet Door Moulding 2-3/4" - 19

This cabinet door rail molding 2-3/4"- 19 measures 2.750" wide by .812" thickness, requiring the use of a three-inch wide blank of four-quarter lumber for milling on an industrial-style molder. The stylish profile contains a 5/8" wide semicircular convex arc on the top left. Connected to a 3/8" smaller arc merged with a 1-1/8" flat line segment in the center. Attached to a 7/16" full half-round bead with a 3/16" wide 5/32" radius quarter round on the design's right side above the dado for the panel.

Are you looking to become more efficient in your current milling production? Please read our commentary on moulder production tips, these clever suggestions were written to help you save time and money on a daily task. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.000" / Depth of Cut = .469" (top knives).

Width = 2.750" / Depth of Cut = .472" (right blades).