Cabinet Door Moulding 2-1/2" - 16

This stylish cabinet drawer front moulding 2-1/2" - 16 measures 2.500" wide by .812" thickness, allowing the pattern to be machined out of four quarter lumber. The attractive profile is composed of a 1-19/32" wide flat line with two 3/32" eased edges on the top center, connected to a 5/64" concave semicircle tangent off of a 7/32" radius arc, merged to a 9/64 horizontal line and 3/16" cove above the dado for the panel on the right side of the design. There is .015" built into the top of the pattern to allow for sanding without altering the detail after the milling process. The matching door stile and rail for this pattern is available for your review and consideration, door rail 3.000" - 60.

Custom-made elegance is a phrase used to define the beauty, style and artisan-ship of thousands of our moulding designs. Weather you own a recently built house or older style residence, we have the ability, knowledge and experience to create profiles that will complement the architectural decor of your client's elegant home.

For knife quoting purposes use the calculator below, we have added only the important measurements. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 2.500" / Depth of Cut = .512" (top knives).