Drawer Front Moulding 2-1/4" - 39

This beveled edge cabinet drawer front moulding 2-1/4" - 39 measures 2.250" wide by .813" thickness, allowing the pattern to be milled out of four quarter lumber. The simplistic profile is comprised of a 1-3/4" wide straight line with a 3/32" radius edge on the left, attached to a 1/2" wide 27.44 degree chamfer on the right side above the dado for the panel. There is .015" of taper on the top of the detail for sanding purposes after milling, this design feature will keep the 3/32" radius edges from being flattened during the finishing process. We offer the matching door rail 3.000" - 52 for your review and consideration.

Be sure to check out a few other profile designs for different rooms in your beautiful home or office, our moulding catalog has over a fifteen thousand profiles to select from. Our eminence derives from over thirty-five years of experience and superior functionality of all our custom knife profiles.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 2.250" / Depth of Cut = .450" (top knives.)