Drawer Front Moulding 1-3/4" - 40

This double reeded drawer front molding 1-3/4" - 40, measures 1.750" wide by .875" thickness, allowing the pattern to utilize four or five quarter lumber for milling on a commercial-grade molder. The double beaded profile contains a 3/8" wide half-circle on both side edges connected by a one-inch wide sunk fillet in the center of the design. We offer the matching door rail of this pattern for your review and consideration, door rail 2.500"- 37.

Our professionally designed acrylic templates and knives include the required draft angles and blend areas to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own an industrial shaper or molder such as a Weinig, Wadkin, Leadermac, SCM, Diehl, Northtech or Homag molder, our precision cutters will mill flawlessly on them all.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.750" / Depth of Cut = .344" (top cutters).