Drawer Front Moulding 1-1/4" - 2

This small drawer front molding 1-1/4" - 2 measures 1.250" width by .750" thickness enabling the use of four quarter lumber for machining on an industrial-grade molder. The beaded profile contains a 1/2" wide half-circle on the top left. The half-round joins a full 3/32" sunk fillet attached to a smaller 9/32" bead and a 3/8" broad fillet with a 3/64" eased edge above the dado for the panel on the design's right side. We offer a matching cabinet door rail for this pattern for your review and consideration, door rail 2.750" - 12.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process, the knives will be capable of milling some of the finest quality architectural moldings you have ever produced.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.250" / Depth of Cut = .408" (top knives).