Crown 8-1/2" - 2

This dignified 8-1/2" - 2 crown mould measures 8.503" width by 1.250" thickness, requiring the use of six-quarter lumber for milling on an industrial-grade molder. The elegant terminating profile contains a 9/16" tall vertical line joined to a two tangent radius cyma recta and an 11/32" tall line on the top left. The center retains a 3-1/4" cove merged with a 5/16" horizontal fillet connected to a 15/64" beveled sunken line segment. Attached to a 3/4" convex arc and a 3/16" vertical segment joined to a 1/2" cove with a 3/8" broad line on the design's bottom right side. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 6-11/16" tall with a projection of 5-1/4" across the top.