Crown Mould 7-1/16" - 7

This delightful 7-1/16" - 7 terminating cove/crown mould comprises a 5/8" tall line segment on the top left. It connects to the center's 6-9/16" concave semicircular arc. The lower portion retains a 1/2" vertical part joined to a 1/4" by 1/4" perpendicular notch with a 5/8" horizontal fillet on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 5" tall with a 5" projection across the top. The pattern measures 7.071" in width by 1.312" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using six-quarter lumber is 7-5/16" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.