Crown Mould 7" - 39

This aesthetically appealing 7" - 39 terminating crown mould comprises 29/64" tall by 11/32" broad perpendicular lines joined to a 3/8" radius concave semicircle on the top left. The half bead connects to a graceful two-tangent radius cyma recta in the center. The lower portion attaches two additional perpendicular lines merged with a lovely cyma reversa with a 5/16" flat area on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 5-1/32" tall with a 4-7/8" projection across the top. The pattern measures 7.000" in width by 1.062" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 7-1/4" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.