Crown Mould 6-13/16" - 2

This traditional 6-13/16" - 2 terminating crown moulding comprises a 13/16" vertical segment on the top left. It connects to a 2-7/32" concave semicircle tangent to a 1-21/32" convex arc creating free-flowing cyma recta in the center. The lower portion retains 27/32" tall by 57/64" broad perpendicular lines on the design's bottom right corner. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 5-1/4" tall with a 4-3/8" projection across the top. The pattern measures 6.828" in width by 1.062" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 7-1/16" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.