Crown Mould 6-3/4" - 4

This aesthetically pleasing 6-3/4" - 4 supporting crown mould comprises a 5/8" quarter round joined to a 7/32" tall fillet on the top left. A graceful cyma recta flowing from a 2-1/16" concave semicircle tangent off a 1-27/32" convex arc occupies the center. The lower portion retains a 3/8" tall by 1/4" broad perpendicular lines and a cyma reverse with a 19/32" broad flat area on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 4-5/8" tall with a 4-15/16" projection across the top. The pattern measures 6.762" in width by .813" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 7" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.