Crown Mould 6-3/4" - 2

This custom 6-3/4" - 2 supporting crown mould retains a 1-1/16" quarter round attached to a 25/64" vertical fillet on the upper left. A free-flowing cyma recta composed from a 1-17/32" concave semicircle tangent off a 1-13/16" convex arc takes up the center. The lower portion comprises a 7/8" cavetto flanked by a 27/64" tall vertical fillet above and a 23/64" horizontal flat area on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 4-13/16" tall with a 4-3/4" projection across the top. The pattern measures 6.762" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 7" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.