Crown Mould 6-3/4" - 1

This opulent 6-3/4" - 10 terminating crown mould will gratify even the most sophisticated client with grace and elegance. The pattern comprises an 11/32" X 17/64" perpendicular line joined to a tear-drop-shaped bead on the top left. It's connected to a lovely free-flowing two-tangent radius cyma recta in the center. The lower portion retains a 5/16" x 5/16" squared area joined to a two-tangent radius cyma reverse with a 1/2" broad flat element on the design's bottom right corner. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 4" tall with a 5-7/16" projection across the top. The pattern measures 6.750" in width by 1.000" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 6" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.