Crown 6-9/16" - 5

This extensive 6-9/16" - 5 crown mould measures 6.541" wide by one-inch thickness, requiring 6-13/16" wide blanks of five-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The terminating symmetrical profile comprises a 5-1/8 radius concave semicircle in the center. It's Flanked by a 7/16" by 17/16" notch and a 17/16" tall and wide line segment on the design's top left and bottom right corners. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 4-5/8" tall with a 4-5/8" projection across the top.