Crown 6-9/16" - 4

This lovely 6-9/16" - 4 crown mould measures 6.531" wide by .812" thickness and requires four-quarter lumber to mill this pattern. The profile consists of a vertical fillet on the top attached to a cyma recta positioned in the middle and a stepped fillet with an attached cavetto on the bottom. When installed, the height becomes 5-7/32" tall with a projection of 3-15/16" wide with the spring angles fixed at thirty-eight and fifty-two degrees. The high points in the crown design are purposely positioned on the same level plane to create superior hold-down conditions while milling the detail on an industrial-style molder.