Crown Moulding 6-3/8" - 4

This premier crown molding 6-3/8" - 4, measures 6.364" width by .812" thickness, enabling the use of four quarter lumber for milling on a commercial-grade molder. The symmetrical terminating profile contains a 4-13/16" radius concave arc in the center. This semicircle connects to a 5/32" wide by 7/32" deep sunken fillet, a thumbnail shaped arc, and a 7/32" cove flanked by small line segments on both the top and bottom of the design. The set spring angles are at forty-five degrees; these committed back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 4-1/2" tall with a projection of 4-1/2" across the top.

Increase search efficiency while looking over 15,000 profile designs in our state-of-the-art molding catalog. Watch the short video on the first page to find design ideas for your next woodworking project; we're sure you will locate the perfect embellished pattern to enhance the architectural style of your beautiful home or office.

For molding knife quoting purposes click to open the calculator below, we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 6.375" / Depth of Cut = .501" (top knives).

Thickness = .812" / Depth of Cut = .669" (right blades) & .669" (left cutters).