Crown Mould 6-3/8" - 18

This ornate 6-3/8" - 18 supporting crown mould comprises a 45/64" quarter-round arc joined to a set of perpendicular lines in the top left. The squared lines connect to three cascading convex arches with a vertical segment and a 1-7/8" cove in the center. The lower portion retains a 29/64" ovolo attached to an 11/64" cove flanked by a vertical and horizontal line on the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 4-1/2" tall with a 4-1/2" projection across the top. The pattern measures 6.364" in width by .687" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 6.625" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.