Crown 6-1/16" - 6

This extravagant 6-1/16" - 6 crown mould measures 6.083" width by 1.062" thickness, requiring a 6-5/16" blank of five-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The compelling terminating profile contains a 25/64" tall by 3/32" broad perpendicular lines joined to a 3/4" quarter-round with a 5/16" vertical line segment, creating the ovolo on the upper left. The short line connects to a 1-7/8" cove in the center, merged with a 3/16" wide by 55/64" tall squared notch, and a 1/8" cavetto attached to a 1/8" horizontal line with a 9/16" convex arc on the design's bottom right corner. The spring angles are at thirty-four and fifty-six degrees. These specific angle positions lock in the height at 5-1/16" tall with a 3-3/8" projection across the top.