Crown 6" - 4

This conventional 6" - 4 crown mould measures 6.000" wide by .812" thickness, requiring the use of a 6-1/4" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial molder. The time-honored profile contains a 49/64" tall vertical line segment on the top left. The line merges with a 1-11/32" concave semicircle tangent off of a 49/64" radius convex arc, forming the cyma recta in the middle. The s-shaped curvature connects to a 1/2" vertical fillet with a one-inch cove and a 1/2" flat line on the designs bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed. These specific angles also lock in the height of 4-3/8" tall with a 4-1/8" projection across the top.

We're delighted you found a beautiful profile that interests you; consider all the other services we offer for your precision woodworking company. Mirror Reflections offers hundreds of tooling supplies for your industrial molder and knife grinding room. If you are new to the industry, read some of our informational articles ; they will help you get started with all the basics. Our companies have a few things in common: our passion for excellence and a quest to be paramount craftsmen for all our clients.