Crown 6" - 32

This fascinating 6" - 32 crown mould measures 6.010" width by .813" thickness permitting the use of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The elegant supporting profile contains a 3/4" tall, half-inch radius quarter round with a 15/64" vertical fillet on the top left. The short line connects to a graceful two tangent radius s-shaped cyma recta in the center. The curvature connects to a 3/8" convex arc flanked by a 1/4" tall by 1/4" broad perpendicular lines with another 1/2" radius quarter round on the design's bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-1/4" tall with a projection of 4-1/4" across the top.