Crown 5-15/16" - 7

This distinctive 5-15/16" - 7 crown mould measures 5.944" width by .812" thickness permitting the use of four-quarter lumber for machining sprung (laying horizontally flat) on an industrial-grade molder. The decorative supporting profile contains an 11/16" quarter round bead joined to a 1/8" vertical line segment on the top left. The center consists of a one-inch concave semicircular arc tangent to a 1-1/16" convex arch forming the beautiful cyma recta, attached to three cascading beads with a 9/16" convex arc tangent off of a 3/16" flat line on the bottom right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-5/32" tall with a projection of 4-1/4" across the top.