Crown 5-7/8" - 12

This concave 5-7/8" - 12 crown mould measures 5.878" width by 1.000" thickness, necessitating the use of a 6-1/8" wide blank of five-quarter lumber for milling sprung (laying horizontally flat) on an industrial molder. The elegant terminating profile contains a 1/2" tall vertical fillet joined to a 5-9/32" radius cove in the upper left-center. The concave semicircle connects to a 1/8" wide by 3/8" tall notch merged with a 3/16" wide by 11/32" tall cut with a 7/16" flat line on the design's bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-3/16" tall with a projection of 4-1/8" across the top.