Crown 5-21/32" - 20

This traditional 5-21/32" terminating crown mould comprises a 9/16" vertical segment on the top left. It connects to a graceful two-tangent radius cyma recta in the center merged with a 17/32" vertical area joined to a 25/32" cove with a 15/32" flat portion on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 4" tall with a 4" projection across the top. The pattern measures 5.656" in width by .687" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 5-15/16" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.