Crown 5-1/2" - 4

This innovative 5-1/2" - 4 crown mould measures 5.515" width by .812" thickness, allowing the use of a 5-3/4" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial-grade molder. The beautiful terminating profile contains a 3/4" radius cove flanked by a 5/16" vertical and a 1/4" wide horizontal fillet on the top left. Connected to a free-flowing two tangent radius cyma reversa in the center. The lower portion of the pattern retains a 9/32" wide by 3/8" tall perpendicular notch, attached to a 21/32" cavetto and a 5/16" flat line on the bottom right side of the design. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-5/16" tall with a projection of 3-7/16" across the top.