Crown 5-1/2" - 35

This ingenious 5-1/2" - 35 crown mould measures 5.504" width by .750" thickness, necessitating the use of a 5-3/4" wide blank of five-quarter lumber for milling sprung (laying horizontally flat) on a commercial-grade molder. The colonial-themed terminating profile contains a 1/4" vertical fillet joined to a fashionable two-tangent radius cyma recta in the top left. The s-shaped curvature attaches to a 9/32" vertical line merged with a 29/64" cove in the center. The cavetto joins a 1/2" wide by 3/4" tall perpendicular notch for inserting rope or dentil moulding, connected to a small ogee with a 3/8" flat line on the lower right corner of the design. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-1/4" tall with a projection of 3.5" across the top.