Crown 5-1/2" - 31

This beautiful 5-1/2" - 31 crown mould measures 5.493" width by 1.000" thickness, necessitating the use of a 5-3/4" wide blank of five-quarter lumber for milling sprung (laying horizontally flat) on an industrial-grade molder. The flamboyant terminating profile contains a 17/64" tall vertical line segment joined to a graceful two-tangent radius ogee with a set of small steps on the top left. The short lines connect to a two-tangent radius elliptical-shaped cavetto in the center. The lower portion of the pattern consists of an 11/16" radius convex arc flanked by short vertical and horizontal line segments with a 15/32" broad flat line on the design's bottom right side. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-3/16" tall with a projection of 3-9/16" across the top.