Crown 5-1/2" - 28

This stylish 5-1/2" - 28 crown mould measures 5.504" width by .750" thickness, allowing the use of a 5-3/4" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The graceful terminating profile contains a 31/64" tall vertical fillet in the upper top left. The short line connects to a 17/32" tall by 27/64" wide perpendicular notch, merged with a free-flowing two tangent radius cyma recta in the center. The lower portion consists of a 39/64" tall by 9/16 broad squared lines on the bottom right side of the design. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-1/4" tall with a projection of 3-1/2" across the top.