Crown 5-1/2" - 14

This fashionable 5-1/2" - 14 crown mould measures 5.526" width by .813" thickness, necessitating the use of a 5-3/4" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial-grade molder. The alluring terminating profile contains a 7/16" vertical segment connected to a 7/32" tall by 11/64" wide perpendicular notch on the top left. The rabbet connects to a graceful two-tangent radius s-shaped curvature with a more extensive set of vertical lines in the center. The lower portion of the pattern consists of a 13/32" tapered line for inserting a piece of decorative 3/8" rope molding, merged with an 11/16" tall by 11/64" broad squared lines with a beautiful ogee and a 15/64" flat line on the design's bottom right side. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-3/8" tall with a projection of 3-3/8" across the top.