Crown 5-7/16" - 9

This fashionable 5-7/16" - 9 supporting crown mould comprises a 9/16" quarter round convex arc joined to a 9/16" tall segment in the top left corner. The center retains graceful cyma recta consisting of two tangent 3/4" radius semicircles. The lower portion contains a 5/8' tall fillet joined to a 21/32" cove with a 47/64" flat area on the design's bottom right corner. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 4-3/32" tall with a 3-5/8" projection across the top. The pattern measures 5.458" in width by .812" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 5-11/16" wide. We offer a few other versions of this pattern at various size widths, heights, and projections for your review and consideration, 2" wide, 2-1/2" width, 3" wide, 4" wide, 5-1/2" width, 7" width, and 8-1/2" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.