Crown 5-7/16" - 11

This beveled 5-7/16" - 11 crown mould comprises a 13/16' tall by 23/32" wide squared area on the top left corner. It connects to the center's 3-1/16" wide splay-faced angled section. The lower portion retains 1-17/64" wide by 43/64" tall perpendicular lines with a small beveled inset connecting it to the center section. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 4" tall with a 3-3/4" projection across the top. The pattern measures 5.461" in width by 1.250" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using six-quarter lumber is 5-3/4" wide. We offer a few other profiles close to this size dimensions for your review and consideration, crown 5.312" - 6, crown mould 5.218" - 8 and crown mould 5.500" - 37.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.